Mobile Home Inspections
Mobile Home Inspections Done Right
Mobile and manufactured homes have unique construction standards and inspection requirements. I have the experience to evaluate them properly.
Why Mobile Home Inspections Are Different
Mobile and manufactured homes are built to a different standard than site-built homes. Rather than local building codes, they are constructed to HUD (U.S. Department of Housing and Urban Development) standards — a federal code that governs everything from structural framing and electrical systems to plumbing and energy efficiency.
This means the systems, materials, and construction methods you'll find in a mobile or manufactured home are often quite different from what you'd find in a conventional home. An inspector who only works on site-built homes may not recognize what's normal, what's a defect, and what's a serious safety concern in a manufactured home.
I inspect mobile and manufactured homes regularly and understand the differences. I evaluate them on their own terms — against HUD standards and the realities of manufactured construction — not against site-built expectations.
What I Inspect
Every mobile home inspection covers all visible and accessible systems and components, with particular attention to the areas where manufactured homes most commonly develop problems.
Roof & Exterior
Roofing material and condition, skirting, siding, windows, doors, and any additions or modifications to the original structure
Undercarriage & Chassis
Steel chassis condition, outriggers, crossmembers, and the underside of the home — an area unique to manufactured homes and often overlooked
Foundation & Tie-Downs
Pier and pad support system, blocking, leveling, and tie-down straps — critical for structural stability and often a source of problems in older homes
Electrical
Service panel, wiring, outlets, GFCI protection, and the connection from the utility pedestal to the home — manufactured homes use a distinct electrical entry system
Plumbing
Supply and drain lines, water heater, fixtures, and belly board condition — the insulated belly wrap beneath the floor is a common source of moisture and pest damage
HVAC
Heating and cooling systems, ductwork (typically run through the belly or floor cavity), and ventilation
Interior
Walls, ceilings, floors, windows, doors, and any signs of water intrusion, soft spots, or structural movement
Additions & Modifications
Rooms, porches, carports, or other additions built onto the original home — these are often unpermitted and may not meet any code standard
What to Watch For in Manufactured Homes
Belly Board Damage
The insulated belly wrap beneath the floor protects plumbing and ductwork. Tears, moisture damage, or pest intrusion here can lead to significant hidden problems.
Pier and Blocking Issues
Improper or deteriorated pier supports cause the home to settle unevenly, leading to sticking doors, cracked walls, and roof leaks. This is one of the most common findings in older manufactured homes.
Roof Coating Condition
Many older mobile homes have flat or low-slope roofs with elastomeric coatings. When these coatings fail, water intrusion follows quickly. Condition and maintenance history matter.
Unpermitted Additions
Room additions, covered porches, and carports are frequently added without permits and may not be structurally sound or properly tied into the original home.
HUD Data Plate
Every manufactured home built after June 1976 should have a HUD data plate inside the home and a certification label on the exterior. Missing labels can affect financing and insurability.
Tie-Down Compliance
California requires manufactured homes to be anchored with an approved tie-down system. Missing or deteriorated tie-downs are a safety and insurance concern.
The Same Detailed Report
You receive the same detailed, photo-rich inspection report I provide for every inspection — a clear, property-specific document that describes every finding, photographs every defect, and prioritizes issues by severity.
The report is written in plain language and delivered digitally, typically within 24 hours of the inspection. It's formatted to be shared with your real estate agent, lender, or contractor.
Schedule a Mobile Home Inspection
Call Martin or send a message with the property address. He'll confirm availability and provide a personal quote.